10 to 30% discount on selected new and DEMO models! ONLY IN STORE!

AVE1994 - HiFi experts with passion - Since 1994

Onkyo Receiver Setup - Models 2018 up

Setup Menu

The unit allows you to configure advanced settings to provide you with an even better experience.

Operation:

Use the on-screen displays (OSD) that appear on the TV to make the settings.

Press  on the remote controller to display the Setup menu.

 

Select the item with the cursor / buttons of the remote controller and press ENTER to confirm your selection.

Use the cursors / to change the default values.

To return to the previous screen, press .

To exit the settings, press .

First run a basic mic setup to get the distances etc sorted. Then:

1.  Select "setup"

2. Select "speakers"

3. Select Crossover

If you are using small speakers, we recommend the following settings:

–Set a value "80Hz" in Crossover frequency.

–Set a value "120Hz" in "LPF of LFE".

–Set a value "Off" in "Double Bass" if you dont want bass to be output to SUBWOOFER and FRONT SPEAKERS

-For more bass select ON if you want bass to your front MAIN speakers (FS110 , FS120  FSxx Etc) and sub to produce bass.

NOTE : Double bass will NOT work if your front speaker are not LARGE and set to FULL BAND

-For large front speakers set value to FULL BAND

5. Set Levels Front +2  / Centre +6 up to +10  /  Rear +6  /  Ceilings +8 (or leave them the way the mic set it although I prefer the personalized settings