top of page

The BasX A3 is a three channel power amplifier. The BasX A3 combines classical audiophile amplifier architecture, based on a heavy-duty linear power supply, and a carefully designed high current short signal path Class A/B output stage, with advanced microprocessor-controlled monitoring and protection circuitry, to deliver superb sound quality at a truly reasonable price.
Audio Specifications
Power Output (ALL channels driven):


• 140 watts RMS per channel; 20 Hz – 20 kHz; THD < 0.1%; into 8 Ohms


• 200 watts RMS per channel; 1 kHz; THD < 1%; into 4 Ohms

Power Output (two channels driven):


• 150 watts RMS per channel; into 8 Ohms


• 250 watts RMS per channel; into 4 Ohms

Power Bandwidth (at rated power; 4 Ohm - 8 Ohm load): 20 Hz to 20 kHz (+ / – 0.02 dB)

Broad Band Frequency Response: 10 Hz to 80 kHz +0/-1.8 dB

THD + noise: < 0.02% (A-weighted); ref rated power

Signal to Noise Ratio (8 Ohm load): > 112 dB; ref rated power; (A-weighted)

Minimum Recommended Load Impedance (per channel): 4 Ohms (equals one 4 Ohm load or two paralleled 8 Ohm loads)

Damping Factor (8 Ohm load): > 500

Input Sensitivity (for rated power; 8 Ohm load): 1.25 V

Gain: 29 dB

Input Impedance: 27 kOhms

Input And Output Connections
Input Connections: Unbalanced (RCA); one each per channel

Speaker Output Connections: Audiophile grade 5-way binding posts

Trigger:


• Trigger Input: 5 – 12 V (AC or DC); <10 mA input current required


• Trigger Output: 12 VDC; can drive any load up to 120 mA

Power Requirements
115 VAC or 230 VAC @ 50 / 60 Hz (automatically detected).
Front Panel Controls and Indicators
• Standby: push button

• Status LEDs: one per channel; blue

• Standby LED: amber

Rear Panel Controls
• AC Power switch: rocker switch (switches AC main power)

• Status LEDs switch: disables front panel Status LEDs.

Protection
The BasX A3 is protected against excessive operating temperature, shorted speaker connections, ground faults, and other common fault conditions.
Mechanical
Dimensions:


• 17” wide x 4” high x 15-1/2” deep (not including connectors)


• 21-1/2” wide x 8” high x 21” deep (boxed)


• Weight:

25 lbs (unboxed)
31 lbs (boxed)

Emotiva BASX-3 3 Channel power amplifier

R34 995,00 Regular Price
R28 995,00Sale Price
VAT Included
Quantity
Only 1 left in stock

    Remember to use your promo code!

    bottom of page