top of page
emo background.jpg

Experience High end audio

Emotiva basx Emotiva ampliers Emotiva Emotiva basx Emotiva ampliers Emotiva Emotiva south africa Emotiva basx Emotiva ampliers Emotiva Emotiva basx Emotiva ampliers Emotiva Emotiva south africa Emotiva basx Emotiva ampliers Emotiva Emotiva basx Emotiva ampliers Emotiva Emotiva south africa Emotiva basx Emotiva ampliers Emotiva Emotiva basx Emotiva ampliers Emotiva Emotiva south africa Emotiva basx Emotiva ampliers Emotiva Emotiva basx Emotiva ampliers Emotiva Emotiva south africa 

emo BasX_MR1_FRONT.webp

Receivers

emo power xpag3_7_front.webp

Power Amps

emo processor.webp

Processors

RECEIVERS

BasX MR1 11.2 Channel Dolby Atmos® & DTS:X™ Cinema Receiver

Was R119990 -  NOW R64995

How long have you been waiting for a receiver that can actually deliver the superb uncompromising performance of separate components? The BasX MR1 cinema receiver combines a high performance 13.2 channel immersive surround sound processor, and an audiophile quality 11 channel amplifier, in a single chassis. The processor section of the MR1 supports 4k UHD video, including HDR and Dolby Vision, enhanced ARC (eARC), and the latest Dolby Atmos® and DTS:X™ immersive surround sound formats. The MR1 features six HDMI 2.0b video inputs, all of which support 4k UHD HDR video, and includes support for enhanced ARC (eARC). Included with the MR1 is a measurement microphone and the latest version of EmoQ, our well-regarded automatic room correction system. The MR1 also offers multiple analog and digital audio inputs, and an integrated Bluetooth receiver with aptX. 

The amplifier section of the BasX MR1 combines 11 channels of audiophile-grade Class A/B amplification. Powered by a massive, class leading 1,000 VA toroidal transformer driving our exclusive Soft Switch Class H power supply for high efficiency, with cool running, reliable operation. The MR1 exhibits complete control over difficult loads and low impedance speakers, The MR1 leaves less capable receivers gasping for air!. The MR1 also includes a full set of line level 13.2 channel preamp outputs, and of course, the amplifier section can be totally disabled if you wish to use the MR1 as a dedicated surround sound processor. 



The BasX MR1 is a true audiophile component, designed and built by professionals to deliver the outstanding performance that both audiophiles and casual listeners can appreciate. The MR1 also features precision high- speed video switches that route video directly from the selected input to the output without any extraneous processing, ensuring that you’ll continue to get the absolute best possible picture quality from your HD and 4k UHD video sources along with support for both ARC and Enhanced eARC. 

The BasX MR1 delivers a truly stellar video and listening experience with incredible power, build quality, and ease of use.

​

Power Output Per Channel; ONE channel driven:
160 watts RMS / channel @ 8 Ohms; 290 watts RMS / channel @ 4 Ohms; < 0.1% THD

Power Output Per Channel; TWO channels driven:
160 watts RMS / channel @ 8 Ohms; 260 watts RMS / channel @ 4 Ohms; < 0.1% THD

Power Output Per Channel; FIVE channels driven:
135 watts RMS / channel @ 8 Ohms; 190 watts RMS / channel @ 4 Ohms; < 0.1% THD

Power Output Per Channel; ELEVEN channels driven:
100 watts RMS / channel @ 8 Ohms; 130 watts RMS / channel @ 4 Ohms; < 0.1% THD

Power Bandwidth (at rated power; 8 Ohm load):
20 Hz to 20 kHz (+ 0 / - 0.15 dB) or better.

BasX MR1L 9.2 Channel Dolby Atmos® & DTS:X™ Cinema Receiver

emo BasX_MR1L_FRONT.webp
emo BasX_MR1L_REAR.webp

Was R89990 - NOW R49995

How long have you been waiting for a receiver that can actually deliver the superb uncompromising performance of separate components? The BasX MR1L cinema receiver combines a high performance 13.2 channel immersive surround sound processor, and an audiophile quality 9 channel amplifier, in a single chassis. The processor section of the MR1L supports 4k UHD video, including HDR and Dolby Vision, enhanced ARC (eARC), and the latest Dolby Atmos® and DTS:X™ immersive surround sound formats. The MR1L features six HDMI 2.0b video inputs, all of which support 4k UHD HDR video, and includes support for enhanced ARC (eARC). Included with the MR1L is a measurement microphone and the latest version of EmoQ, our well-regarded automatic room correction system. The MR1L also offers multiple analog and digital audio inputs, and an integrated Bluetooth receiver with aptX. 

The amplifier section of the BasX MR1L features 9 channels of audiophile-grade Class A/B amplification, powered by a massive 660 VA toroidal transformer, to deliver superb sound quality and cool reliable operation. The MR1L exhibits complete control over difficult loads and low impedance speakers, leaving less capable receivers gasping for air. The MR1L also includes a full set of line level 13.2 channel preamp outputs, and of course, the amplifier section can be totally disabled if you wish to use the MR1L as a dedicated surround sound processor. 



The BasX MR1L is a true audiophile component, designed and built by professionals to deliver the outstanding performance that both audiophiles and casual listeners can appreciate. The MR1L also features precision high- speed video switches that route video directly from the selected input to the output without any extraneous processing, ensuring that you’ll continue to get the absolute best possible picture quality from your HD and 4k UHD video sources along with support for both ARC and Enhanced eARC. 

The BasX MR1L delivers a truly stellar video and listening experience with incredible power, build quality, and ease of use.

​

Speaker Outputs (Amplifier Section)

Power Output Per Channel; ONE channel driven:
150 watts RMS / channel @ 8 Ohms; 220 watts RMS / channel @ 4 Ohms; < 0.1% THD

Power Output Per Channel; TWO channels driven:
140 watts RMS / channel @ 8 Ohms; 200 watts RMS / channel @ 4 Ohms; < 0.1% THD

Power Output Per Channel; FIVE channels driven:
110 watts RMS / channel @ 8 Ohms; 140 watts RMS / channel @ 4 Ohms; < 0.1% THD

Power Output Per Channel; NINE channels driven:
85 watts RMS / channel @ 8 Ohms; 100 watts RMS / channel @ 4 Ohms; < 0.1% THD

Power Bandwidth (at rated power; 8 Ohm load):
20 Hz to 20 kHz (+ 0 / - 0.15 dB) or better

POWER AMPLIFIERS

XPA-7 Gen3 7 Channel Audiophile Home Theater Power Amplifier

emo power xpag3_7_front.webp
emotiva PA 7ch.jpg

Was R109990 - NOW R74995

Circuit Topology

The XPA-7 Gen3 is a fully modular audio power amplifier with a high-efficiency switch mode power supply (SMPS), independent, fully discrete, dual differential, high current, short signal path Class A/B amplifier modules, Optimized Class H™ power supply topology, and microprocessor-controlled fault protection.

The XPA-7 is powered by a high efficiency, audiophile grade, Switch Mode Power Supply (SMPS).

 

Audio Specifications

The XPA-7 Gen3 features seven of our High-Powered Single Channel Modules.  

 

Audio Specifications (Seven High-Powered Single Channel Modules):

Power Output:

• 300 watts RMS/channel; 20 Hz – 20 kHz; THD<0.1%; 8 Ohms; one channel driven

• 550 watts RMS/channel; 20 Hz – 20 kHz; THD<0.2%; 4 Ohms; one channel driven

• 300 watts RMS/channel; THD<0.1%; 8 Ohms; two channels driven


• 490 watts RMS/channel; THD<0.1%; 4 Ohms; two channels driven

• 200 watts RMS/channel; THD<0.1%; 8 Ohms; ALL SEVEN channels driven

Power Bandwidth (at rated power; 4 Ohm - 8 Ohm load): 20 Hz to 20 kHz (+ / – 0.1 dB)

Broad Band Frequency Response: 5 Hz to 80 kHz +0/-2 dB

THD + noise: < 0.005%; at 100 watts RMS; 1 kHz; 8 Ohms

Signal to Noise Ratio (8 Ohm load):

• > 117 dB; ref FTC rated power; unbalanced input (A-weighted)

• > 91 dB; ref 1 watt; unbalanced input (A-weighted)

Minimum Recommended Load Impedance (per channel): 4 Ohms (which equals one 4 Ohm load or two paralleled 8 Ohm loads)

Damping Factor (8 Ohm load): > 500

Input Sensitivity (for rated power; 8 Ohm load): 1.5 V

Gain: 29 dB

Maximum Power Consumption: 2,600 watts.

XPA-5 Gen3 5 Channel Audiophile Home Theater Power Amplifier

emotiva 5 ch.jpg
emo power 5 R 50x50.jpg

Was R89990 - NOW R59995

The power amplifier performs the simple but critical job of boosting the output signals from each channel of your stereo preamp or surround sound processor to the level necessary to drive your loudspeakers. While this may seem trivial, a really good power amp is essential to having a great audio system, because any flaws in the performance of your power amp are going to limit the performance of your entire system. Every amplifier in the new Third Generation XPA series was carefully designed to deliver superb technical performance, unsurpassed sound quality, and an exceptionally accurate and dynamic rendition of all types of music, thus ensuring that your entire system will sound its absolute best. Each individual XPA amplifier is modular, and can be customized to provide exactly the power and number of channels you need today, and expanded later if your needs change; and multiple matching chassis enable you to add even more channels, or more power, for a near endless variety of options.

 

XPA-5

The new XPA-5 is a five-channel audiophile quality power amplifier, and is perfect for powering:

  • A superb high-end 5.1 channel system

  • The 5 main channels in a 5.1.2. 5.1.4, or 5.1.6 channel Dolby Atmos or DTS-X system

For a truly stellar system, optimized for both two channel and surround sound listening, consider combining an XPA-DR2 for the front left and right channels with an XPA-5 for the remaining channels.

Configuration:
5 x High-Powered Single-Channel Modules
(two module slots remain available for future expansion)

Power output:
250 watts/channel RMS into 8 Ohms; all channels driven
300 watts/channel RMS into 8 Ohms; two channels driven
490 watts/channel RMS into 4 Ohms; two channels driven

​

The XPA-5 Gen3 is a fully modular audio power amplifier with a high-efficiency switch mode power supply (SMPS), independent, fully discrete, dual differential, high current, short signal path Class A/B amplifier modules, Optimized Class H™ power supply topology, and microprocessor-controlled fault protection.

The XPA-5 is powered by a high efficiency, audiophile grade, Switch Mode Power Supply (SMPS).

Audio Specifications

The XPA-5 Gen3 features five of our High-Powered Single Channel Modules. 

XPA-5 Gen3 5 Channel Audiophile Home Theater Power Amplifier

emotiva 3 cha.jpg
emotiva 3ch PA rear.jpg

XPA-3 Gen3 3 Channel Audiophile Home Theater Power Amplifier

Was R57990 - NOW R49995

XPA-3

The XPA-3 Gen3 is a fully modular audio power amplifier with a high-efficiency switch mode power supply (SMPS), independent, fully discrete, dual differential, high current, short signal path Class A/B amplifier modules, Optimized Class H™ power supply topology, and microprocessor-controlled fault protection.

The XPA-3 is powered by a high efficiency, audiophile grade, Switch Mode Power Supply (SMPS).

 

Audio Specifications

The XPA-3 Gen3 features three of our High-Powered Single Channel Modules.  

 

Audio Specifications (Three High-Powered Single Channel Modules):

Power Output:

• 300 watts RMS/channel; 20 Hz – 20 kHz; THD<0.1%; 8 Ohms; one channel driven

• 550 watts RMS/channel; 20 Hz – 20 kHz; THD<0.2%; 4 Ohms; one channel driven

• 300 watts RMS/channel; THD<0.1%; 8 Ohms; two channels driven

• 490 watts RMS/channel; THD<0.1%; 4 Ohms; two channels driven

• 275 watts RMS/channel; THD<0.1%; 8 Ohms; ALL THREE channels driven

Power Bandwidth (at rated power; 4 Ohm - 8 Ohm load): 20 Hz to 20 kHz (+ / – 0.1 dB)

Broad Band Frequency Response: 5 Hz to 80 kHz +0/-2 dB

THD + noise: < 0.005%; at 100 watts RMS; 1 kHz; 8 Ohms

Signal to Noise Ratio (8 Ohm load):

• > 117 dB; ref FTC rated power; unbalanced input (A-weighted)

• > 91 dB; ref 1 watt; unbalanced input (A-weighted)

Minimum Recommended Load Impedance (per channel): 4 Ohms (one 4 Ohm load or two paralleled 8 Ohm loads).

Damping Factor (8 Ohm load): > 500

Input Sensitivity (for rated power; 8 Ohm load): 1.5 V

Gain: 29 dB

Maximum Power Consumption: 1,400 watts.

XPA-2 Gen3 2 Channel Audiophile Home Theater Power Amplifier

emo power 2 F 50x50.jpg
emo power 2 R 50x50.jpg

Was R64990 - NOW R39995

XPA-2

The new XPA-2 is a two-channel audiophile quality power amplifier, and is perfect for powering:

  • A superb quality stereo or 2.1 channel music system.

  • The two critical main channels of a 5.1 channel or 7.1 channel home theater system.

Adding an XPA-2 to your current high-quality AVR is a great way to take your two-channel music listening to a whole new level of enjoyment.

Configuration:
2 x High-Powered Single-Channel Modules
(five module slots remain available for future expansion)

Power output:
300 watts/channel RMS into 8 Ohms; two channels driven
490 watts/channel RMS into 4 Ohms; two channels driven

Circuit Topology

The XPA-2 Gen3 is a fully modular audio power amplifier with a high-efficiency switch mode power supply (SMPS), independent, fully discrete, dual differential, high current, short signal path Class A/B amplifier modules, Optimized Class H™ power supply topology, and microprocessor-controlled fault protection.

The XPA-2 is powered by a high efficiency, audiophile grade, Switch Mode Power Supply (SMPS).

 

Audio Specifications

The XPA-2 Gen3 features two of our High-Powered Single Channel Modules.  

 

Audio Specifications (Two High-Powered Single Channel Modules):

Power Output:

•300 watts RMS/channel; 20 Hz – 20 kHz; THD<0.1%; 8 Ohms; one channel driven

•550 watts RMS/channel; 20 Hz – 20 kHz; THD<0.2%; 4 Ohms; one channel driven

•300 watts RMS/channel; THD<0.1%; 8 Ohms; two channels driven

•490 watts RMS/channel; THD<0.1%; 4 Ohms; two channels driven

emo basx 2 F 50x50.jpg
emo basx 2 R 50x50.jpg

Was R34990 - NOW R24995

The BasX A2 is a two channel power amplifier that delivers 160 watts / channel into 8 Ohms and 250 watts / channel into 4 Ohms, with a rated THD+N of < 0.02%, and an A-weighted S/N ratio of 112 dB. The BasX A2 features a heavy-duty linear power supply, high-quality Class A/B amplification, transparent fault protection, and a trigger input and output. The BasX A2 also offers a convenient feature that allows the amp to switch on when an audio signal is detected at its input - which is especially useful if your preamp or receiver doesn't offer a trigger output. High quality industry standard unbalanced RCA inputs enable the BasX A2 to be used with almost any preamp or processor and audiophile grade five way speaker terminals accept banana plugs, spade lugs, or bare wire. These features combine to enable the BasX A2 to deliver true audiophile performance and sound quality at an amazingly affordable price.

 

Power Output:

(Two Channels Driven)

•160 watts RMS per channel; 20 Hz – 20 kHz; THD < 0.1%; into 8 Ohms


•250 watts RMS per channel; 1 kHz; THD < 1%; into 4 Ohms

Power Bandwidth (at rated power; 4 Ohm - 8 Ohm load): 20 Hz to 20 kHz (+ / – 0.07 dB)

Broad Band Frequency Response: 10 Hz to 80 kHz +0/-1.8 dB

THD + noise: < 0.02% (A-weighted); ref rated power

Signal to Noise Ratio (8 Ohm load):
> 112 dB; ref rated power; (A-weighted)

Minimum Recommended Load Impedance (per channel): 4 Ohms (equals one 4 Ohm load or two paralleled 8 Ohm loads).

BAS X-2 Gen3 2 Channel Audiophile Home Theater Power Amplifier

emo basx 5 F 50x50.jpg
emo basx 5 R 50x50.jpg

Was R42990 - NOW R31995

The BasX A5 is a five channel power amplifier that delivers 95 watts / channel into 8 Ohms and 130 watts / channel into 4 Ohms, all channels driven, with a rated THD+N of < 0.02%, and an A-weighted S/N ratio of 116 dB. The BasX A5 features a heavy-duty linear power supply, high-quality Class A/B amplification, transparent fault protection, and a trigger input and output. High quality industry standard unbalanced RCA inputs enable the BasX A5 to be used with almost any preamp or processor and audiophile grade five way speaker terminals accept banana plugs, spade lugs, or bare wire. These features combine to enable the BasX A5 to deliver true audiophile performance and sound quality at an amazingly affordable price.

The BasX A5 is a great choice if you're looking for a high quality five channel amplifier to go with a processor in a new 5.1 channel surround sound system, or if you're looking for an easy way to upgrade the amps in your existing surround sound

​

Power Output (ALL channels driven):

• 95 watts RMS per channel; 20 Hz – 20 kHz; THD < 0.1%; into 8 Ohms

• 130 watts RMS per channel; 1 kHz; THD < 1%; into 4 Ohms

Power Output (two channels driven):


• 120 watts RMS per channel; into 8 Ohms


• 175 watts RMS per channel; into 4 Ohms

Power Bandwidth (at rated power; 4 Ohm - 8 Ohm load): 20 Hz to 20 kHz (+ / – 0.02 dB)

Broad Band Frequency Response: 10 Hz to 80 kHz +0/-1.8 dB

THD + noise: < 0.02% (A-weighted); ref rated power

BAS X-2 Gen3 5 Channel Audiophile Home Theater Power Amplifier

emo basx 2 F 50x50.jpg

The BasX A5 is a five channel power amplifier that delivers 95 watts / channel into 8 Ohms and 130 watts / channel into 4 Ohms, all channels driven, with a rated THD+N of < 0.02%, and an A-weighted S/N ratio of 116 dB. The BasX A5 features a heavy-duty linear power supply, high-quality Class A/B amplification, transparent fault protection, and a trigger input and output. High quality industry standard unbalanced RCA inputs enable the BasX A5 to be used with almost any preamp or processor and audiophile grade five way speaker terminals accept banana plugs, spade lugs, or bare wire. These features combine to enable the BasX A5 to deliver true audiophile performance and sound quality at an amazingly affordable price.

The BasX A5 is a great choice if you're looking for a high quality five channel amplifier to go with a processor in a new 5.1 channel surround sound system, or if you're looking for an easy way to upgrade the amps in your existing surround sound

​

Power Output (ALL channels driven):

• 95 watts RMS per channel; 20 Hz – 20 kHz; THD < 0.1%; into 8 Ohms

• 130 watts RMS per channel; 1 kHz; THD < 1%; into 4 Ohms

Power Output (two channels driven):


• 120 watts RMS per channel; into 8 Ohms


• 175 watts RMS per channel; into 4 Ohms

Power Bandwidth (at rated power; 4 Ohm - 8 Ohm load): 20 Hz to 20 kHz (+ / – 0.02 dB)

Broad Band Frequency Response: 10 Hz to 80 kHz +0/-1.8 dB

THD + noise: < 0.02% (A-weighted); ref rated power

BAS X-2 Gen3 5 Channel Audiophile Home Theater Power Amplifier

emo basx 2 R 50x50.jpg

Was R34990 - NOW R24995

bottom of page