top of page
M&K back.JPG
M&K
M Series System
M&K

M50 Speaker

NEW design – form and function are optimized for today’s listening and viewing experience. The décor-friendly On-Wall design gives the customers the flexibility for an easy and simple installation where performance and esthetic are the core elements.

The ultra slim, low-profile enclosure is the benchmark for the NEW M Series. All model is designed specifically for direct On-Wall mounting and is fitted with integral rear panel brackets, along with specially designed damping pads to ensure easy and vibration-free installation. All mounting accessories is included providing a simple and hassle-free installation

All models feature new components as well as a new improved cross-over making each model a true voice match within the M Series.

Nominal system impedance: 4 ohm (Z-min 4.9 ohm)

Frequency Response: 100-20Khz (average response in room +/- 2dB)

Frequency Roll Off: 100Hz (-6dB 100 Hz near field wall mounted)

Crossover Frequency: 1.8 Khz “Phase focused” (4th&2nd order)

Tweeter (shielded): 1” Dome – Coated silk dome / Neodymium magnet

Woofer (shielded): 4” Coated glass fibre

Power Handling: 80 watt Long term IEC-268-5 (cycled input 100-20Khz)

Power Handling: 50 watt (Rated IEC-268-5 (constant input 100-20Khz)

Recommended Amplifier Power: 25-125 watt

Sensitivity: 85 dB (Average SPL 2.83 Volt / 1mtr (on axis 200-10KHz)

System Princip: Sealed enclosure

Connection: Terminal gold plating (Screw for 5 mm cable / Banana)

R8490 each

M&K

M70 Speaker

NEW design – form and function are optimized for today’s listening and viewing experience. The décor-friendly On-Wall design gives the customers the flexibility for an easy and simple installation where performance and esthetic are the core elements.

The ultra slim, low-profile enclosure is the benchmark for the NEW M Series. All model is designed specifically for direct On-Wall mounting and is fitted with integral rear panel brackets, along with specially designed damping pads to ensure easy and vibration-free installation. All mounting accessories is included providing a simple and hassle-free installation

All models feature new components as well as a new improved cross-over making each model a true voice match within the M Series.

Impedance4 ohm

Frequency Response:80 – 20Khz (+/- 2dB)

Frequency Roll Off:80Hz (-10dB 80 Hz near field wall mounted)

Crossover Frequency:1.8 Khz

Tweeter (shielded):1” Dome – Coated silk dome / Neodymium magnetFrequency

Woofer (shielded):2 x 4” Coated glass fibre

Power Handling:125 watt (Long term IEC-268-5)

Power Handling:70 watt (Rated IEC-268-5)

Recommended Amplifier Power:25-200W

Sensitivity:89 dB

System Princip:Sealed enclosureWall

Connection:Terminal gold plating (Screw for 5 mm cable / Banana)

R11990 each

M&K

R19990 each

M90 Speaker

The NEW M90 Miller & Kreisel delivers everything and then a little more.

M90 a step-up to the M50 and M70 speakers. The décor-friendly On-Wall ultra slim and low enclosure design is the benchmark for all M Series.

In the NEW M90, we have added 2 additional bass drivers, it adds both sensitivity and bass response over its brethren. Ideally suited for rooms where extra output is needed.

  • The M90 has each set of woofers in their own anti-resonant acoustic chamber, the center 2 working as a midrange, and the other 2 woofers covering bass frequencies. This is to ensure minimal distortion and cabinet resonances common with slim speakers.

  • The M90 is also phase aligned to operate as an ideal center channel speaker, with 100% symmetric coverage vertically and horizontally

New high-performance components:

  • 1” coated silk dome neodymium tweeter.

  • 4” glass fiber woofers.

  • Phase-focused crossover designs optimized for wall mounting.

In addition to the performance enhancements of the M90, it also sports a long profile, designed to match up to today’s large format flat screen TV’s for a more pleasing aspect ratio.

Available in satin paint White & Black, matching all M Series products

Nominal System Impedance4 ohm(Z-min 3.4 ohm)

Frequency Response:70-20K Hz(average response in room +/- 2 dB)

Frequency Roll Off:70 Hz(-10 dB 80 Hz near field wall mounted)

Crossover Frequency:600 Hz / 2.0 KHz“Phased focused” (2nd order) Tapered

Tweeter (shielded):1” DomeCoated Silk dome / Neodymium magnet

Woofer4 x 4″Coated Glass Fiber

Power Handling:150 wattLong term IEC-268-5 (cycled input 80-20K Hz)

Power Handling:70 wattRated IEC-268-5 (constant input 80-20K Hz)

Recommended Amplifier Power:25-200W(Recommended amp power to driver speaker)

Sensitivity:89 dB

System Princip:Sealed enclosure

Connection:Terminal gold platingScrew for 5mm Cable / Banana

AccessoriesYesWall mount Brackets/Screws/Gloves

Welcome cardYes“Included in packing”

M&K

M40T Speaker

NEW design – form and function are optimized for today’s listening and viewing experience. The décor-friendly On-Wall design gives the customers the flexibility for an easy and simple installation where performance and esthetic are the core elements.

The ultra slim, low-profile enclosure is the benchmark for the NEW M Series. All model is designed specifically for direct On-Wall mounting and is fitted with integral rear panel brackets, along with specially designed damping pads to ensure easy and vibration-free installation. All mounting accessories is included providing a simple and hassle-free installation

All models feature new components as well as a new improved cross-over making each model a true voice match within the M Series.

Nominal system impedance:4 ohm (Z-min 4.6 ohm)

Frequency Response:100-20Khz (average response in room +/- 2dB)

Frequency Roll Off:100Hz (-6dB 100 Hz near field wall mounted)

Crossover Frequency:2.0 Khz “Phase focused” (4th&2nd order)

Tweeter (shielded):1” Dome – Coated silk dome / Neodymium magnet

Woofer (shielded):4” Coated glass fibre

Side drivers (shielded):2 X 3″ (Polymer Coated Textured Paper)

Power Handling:80 watt Long term IEC-268-5 (cycled input 100-20Khz)

Power Handling:50 watt (Rated IEC-268-5 (constant input 100-20Khz)

Recommended Amplifier Power:25-125 watt (Recommended amp power to drive speaker)

Sensitivity:85 dB (Average SPL 2.83 Volt / 1mtr (on axis 200-10KHz)

System Princip:Sealed enclosure

Connection:Terminal gold plating (Screw for 5 mm cable / Banana)

R19990 per pair

MK_sound_5_1_system_A_1024x1024.webp

Miller & Kreisel Movie 5.1 system saves on space, not on SOUND.

The flat design of the K50-front speakers makes for a visually pleasant unobtrusive appearance. The trapezoidal shape of the K40T not only looks good, but it also brings a tonal advantage for the surround sound.

The Movie 5.1 – with minimum space requirements, excellent home theater sound, and outstanding price-performance. This makes it a real recommendation not only for beginners. In particular, in its specialized field of film sound playback, the compact surround set plays big.
Atmospheric scenes dominated the thrilling as well as fast-paced action scenes, always paired with a crystal-clear dialogue reproduction.

The Movie 5.1 box consist of:

  • 3x LCR Speaker K50

  • 2x surround speaker K40T

  • 1 subwoofer V8

  • Power cord

  • Wall brackets

Sound:

  • Frequency Range: K50: 100 – 20,000 Hz

  • Tweeter: 1-inch, silk (only K40T / K50)

  • Woofer: 4-inch, fiberglass (only K40T / K50)

  • Woofer: 8 inches (only Subwoofer)

  • Subwoofer connections: 1x mono / stereo RCA in

  • 1x stereo RCA out

R39990 per set

MK PACKS_80770-1082x430.jpg
750 Series THX Select
MK LCR750_D_1024x1024.webp

M&K LCR750 On-Wall Speaker
 

The NEW Miller & Kreisel 750 Series takes the THX Select category to new a level and we are proud to introduce a true acoustic upgrade, in the form of our own customized Danish designed and produced tweeters.

We’ve taken the innovative high-performance technologies from the S150 Series and integrated them into the NEW Miller & Kreisel 750 Series.

New Danish-designed high-performance tweeters

28 mm vented voice coils provide high power handling and extended linearity.
28 mm high-precision coated soft dome.
Specially constructed resonance-damped tweeter magnet-system for precise transient control.
Integrated waveguide combined with short horn load for wide dispersion and smooth frequency response.
High frequency prism system – Curved metal grill and angle tweeter for optimized off-axis response as well as on-axis response.

New 5.25-inch woofers

Aluminum distortion-killer rings for reduced distortion at high SPL levels.
New extra-stiff coated fiberglass cone with special M&K profile geometry.
Vented pole piece in magnet system for low compression performance.
Vented voice coil for low compression.

New optimized crossovers

Phase-focused crossover designs optimized for low crossover points and transient control.
New proprietary M&K Sound interconnect cables.

R25990 per pair

MK LCR750C_D.jpg

LCR750C Speaker

Identical with the LCR750, but designed as a center speaker.

The NEW Miller & Kreisel 750 Series takes the THX Select category to new a level and we are proud to introduce a true acoustic upgrade, in the form of our own customized Danish designed and produced tweeters.

We’ve taken the innovative high-performance technologies from the S150 Series and integrated them into the NEW Miller & Kreisel 750 Series.

The NEW Miller & Kreisel 750 Series takes the THX Select category to new a level and we are proud to introduce a true acoustic upgrade, in the form of our own customized Danish designed and produced tweeters.

We’ve taken the innovative high-performance technologies from the S150 Series and integrated them into the NEW Miller & Kreisel 750 Series.

New Danish-designed high-performance tweeters

  • 28 mm vented voice coils provide high power handling and extended linearity.

  • 28 mm high-precision coated soft dome.

  • Specially constructed resonance-damped tweeter magnet-system for precise transient control.

  • Integrated waveguide combined with short horn load for wide dispersion and smooth frequency response.

  • High frequency prism system – Curved metal grill and angle tweeter for optimized off-axis response as well as on-axis response.

New 5.25-inch woofers

  • Aluminum distortion-killer rings for reduced distortion at high SPL levels.

  • New extra-stiff coated fiberglass cone with special M&K profile geometry.

  • Vented pole piece in magnet system for low compression performance.

  • Vented voice coil for low compression.

New optimized crossovers

  • Phase-focused crossover designs optimized for low crossover points and transient control.

  • New proprietary M&K Sound interconnect cables.

R12990 each

MK SUR55T-1000x1000.webp

R27990 per pair

Miller & Kreisel SUR55T - THX Tri-Pole Surround Speakers

The M&K SUR55T is the most compact THX Tripole® solution we offer and is timbre matched to any of the 750 Series speakers.

 

Ultra-compact speaker featuring our new 750 Series components, together with 2 dedicated side drivers operating in a dipole fashion,

providing the most optimal cinematic surround sound available.

 

Featuring two 3” mid-tweeters on each side of the speaker oriented in dipole fashion, combined with the front-mounted 1” soft-dome tweeter and a 5.25” midwoofer direct radiating, the SUR55T provides even distribution of sound throughout the listening area with pinpoint accuracy and an enveloping soundfield.

 

The NEW Miller & Kreisel 750 Series takes the THX Select category to new a level and we are proud to introduce a true acoustic upgrade, in the form of our own customized Danish designed and produced tweeters.

 

We’ve taken the innovative high-performance technologies from the S150 Series and integrated them into the NEW Miller & Kreisel 750 Series.

 

New Danish-designed high-performance tweeters

  • 28 mm vented voice coils provide high power handling and extended linearity.

  • 28 mm high-precision coated soft dome.

  • Specially constructed resonance-damped tweeter magnet-system for precise transient control.

  • Integrated waveguide combined with short horn load for wide dispersion and smooth frequency response.

  • High frequency prism system – Curved metal grill and angle tweeter for optimized off-axis response as well as on-axis response.

 

New 5.25-inch woofers

  • Aluminum distortion-killer rings for reduced distortion at high SPL levels.

  • New extra-stiff coated fiberglass cone with special M&K profile geometry.

  • Vented pole piece in magnet system for low compression performance.

  • Vented voice coil for low compression.

 

New optimized crossovers

  • Phase-focused crossover designs optimized for low crossover points and transient control.

  • New proprietary M&K Sound interconnect cables.

MK PACKS_80770-1082x430.jpg
950 Series THX Select
MK LCR950_black_angle.jpg

The LCR950 THX Select2 Series takes full advantages of M&K’s legacy and are designed featuring exact same driver and x-over components as used in the active professional studio monitors and in the S150 Series.

The dual bass-midrange drivers specially designed for extended dynamic range and low compression at moderate to high listening level and combined with our 1” waveguide tweeter the LCR950 deliver the superior performance known from any M&K speaker and provides perfect imaging in both “on” and “off axis” listening positions.

Impedance:  4 ohm

Recommended Amplifier Power:  25-400W

Bass/Midrange:  2 x 5.25” Polypropylene

High Frequency Driver:  1” Soft fabric dome

Frequency Response:  80-20Khz +/-3dB

Sensitivity:  90 dB, 2,83V1m

R12990 each

MK MP950_black_Angle.jpg

MP950 On-Wall Speaker

The Timbre matched shallow On-Wall speaker MP950 are a full member of the 950 Series.

MP950 are featured with same drivers as the LCR950 speaker, but are especially designed for On-Wall applications, having the crossover network to compensate for wall boundry effect.

MP950 has integrated bracket for vertical wall mount.

Impedance:  4 ohm

Recommended Amplifier Power:  25-200 watt

Bass/Midrange:  2 x 5.25” Polypropylene

High Frequency Driver:  1” Soft fabric dome

Frequency Response:  80-20Khz +/-3dB

Sensitivity:  90 dB, 2,83V1m

R12990 each

MK IW95_angle.jpg

IW95 In-Wall Speaker

 

As a direct descendent of M&K Sound’s standard-setting professional studio monitors, the highly versatile IW95 is built on a thick rock-solid steel baffle and uses serious steel mounting brackets.

The universal IW95 is suitable for any complex installation and deliver a seamless, holographic, three-dimensional listening experience.

Impedance:  4 ohm

Recommended Amplifier Power:  25-300W

Bass/Midrange:  6.5” Polypropylene

High Frequency Driver:  1” Soft fabric dome

Frequency Response:  80 Hz – 20 kHz, ±3dB

Sensitivity:  91 dB, 2.83V/1m

R12990 each

MK IW950_angle.jpg

IW950 In-Wall Speaker

The IW950 incorporates proprietary M&K Sound drive units and technologies drawn from the classic 950 Series.

Stable, smooth installation and the same sophisticated design philosophy developed for all M&K Sound speakers ensures even sound throughout any room with superior imaging, whether mounted In-Wall or In-Ceiling.

Impedance: 4 ohm

Recommended Amplifier Power:25-400W

Bass/Midrange:2 x 5.25” Polypropylene

High Frequency Driver:1” Soft fabric dome

Frequency Response:80 Hz – 20 kHz, ±3dB

Sensitivity:90 dB, 2.83V/1m

R12990 each

MK IW5-A.jpg

IW5 In-Wall Speaker

Designed with the same richly detailed sound as the M&K Sound M Series. The IW5 is supplied with a slim round grille making it the optimal choice as the In-Ceiling solution.

The ultra compact IW5 is the invisible flush-mount speaker that delivers consistent sound quality across large spaces or multiple zones.

Impedance:  4 ohm

Recommended Amplifier Power:  25-125W

Bass/Midrange:  4” Polymer coated texture taper

High Frequency Driver:  1” Soft fabric dome

Frequency Response:  100 Hz – 20 kHz, ±3dB

Sensitivity:  85 dB, 2.83V/1m

R12990 each

M&K

IC95 In-Wall/In-Ceiling Loudspeaker

The new compact IC95 integrated loudspeaker system is based on the well proven proprietary 6,5-inch mid-woofer, also used in Miller & Kreisel studio monitor system MPS1620P and in-wall system IW95.

The mid-woofer in IC95 is a long time accepted key component in the Miller & Kreisel signature sound history, now appearing as the key component for the smallest and most compact format ever – to provide the real Miller & Kreisel sound.

IC95 present a new developed axial mounted 1” soft fabric dome tweeter, designed with swivel function to angle and optimize the on-axis response to the listening positions.

Tweeter:  1” Coated Silk dome with swivel function

Woofer:  6 5”Mineral flled polypropylene

System Impedance:  4 Ohm

SPL (2 83V/1mtr):  90 dB

Power Handling:  150 Watt

Frequency Response with Can:  70 Hz – 20 Khz

Frequenscy Response without Can:  50 Hz – 20 Khz

R12990 each

MK PACKS_80770-1082x430.jpg
150 Series THX PRO series Select
MK IW150_angle.jpg

IW150 In-Wall Speaker

This award winning design is the In-Wall equivalent of M&K Sound’s S150 Series used on a daily basis as the preferred monitoring tool in hundreds of professional film and music recording studios around the world and in thousands of serious home entertainment systems.

Can there be any better choice than the speakers on which your favorite movies and music were actually created?

Impedance:  4 ohm

Recommended Amplifier Power: 25-400W

Bass/Midrange: 2 x 5.25” Polypropylene

High Frequency Driver: 3 x 1” Soft fabric dome

Frequency Response: 80 Hz – 20 kHz, ±3dB

Sensitivity: 90 dB, 2.83V/1m

R36990 each

M&K

IW150T Tripole® In-Wall Speaker

The IW150T® is the In-Wall equivalent of the famous S150T Tripole® surround speakers. Incorporating the exact same drivers and crossover technology as the S150T sealed cabinet speaker, the IW150T® delivers uncompromising performance from a less obtrusive form factor.

Modern installations and new surround formats such as Dolby Atmos and DTS X are incorporating more and more surround channels. In-Wall (and In-Ceiling) installations allow you to expand to take full advantage of these new formats without the clutter of visible wires or speakers.

The Introduction of the IW150T Tripole ® Speaker means you can have the same M&K 150 Series Acoustic Performance from a completely invisible installation.

Nominal System Impedance4 ohm

Frequency Response60Hz-20kHz, +/-3dB

Frequency Roll Off55Hz -6dB

Crossover Frequency1.5Khz

Front Tweeter1.1” Dome, Coated Silk Dome / Low Compression

Front Woofer5.25”, Coated Glass Fiber

Side Drivers2 x 2.35”, Polymer Coated Textured Paper

Power Handling100W Long Term IEC-268-5 (Cycled Input 80-20kHz)

Power Handling50W rated IEC-268-5 (Constant Input 80-20kHz)

Recommended Amp Power25-200W

Sensitivity85dB verage SPL 2.83V / 1M (On-Axis 200-10kHz)

R48990 each

M&K

The IW150A is a versatile in-wall/in-ceiling speaker, designed for the ultimate home theater experience

The IW150A. Targeted primarily as a Dolby Atmos-friendly in-ceiling model, it can also be used for other in-wall cinema or multi-room music applications. Its single 15-degree angle-fixed tweeter makes the IW150A ideal for effects-based sound in multi-speaker setups.

The debut of the new 150 member means that, along with the IW28S subwoofer, there is within the 150 Series a complete in-wall/ in-ceiling seamless solution for reference-grade home cinemas.

The Versatile use of the IW150A makes it fit in any position. Turn it – UP, SIDE or DOWN your choice.

Nominal System Impedance4 ohm(Z-min 3 4 ohm)

Frequency Response80-20K Hz(average response in room +/- 3 dB)

Frequency Roll Off80 Hz(-9 dB 80 Hz near field)

Crossover Frequency2 0K Hz“Phase focused” (2nd order)

Tweeter1 x 1,1” DomeCoated silk dome / Low compression

Tweeter Angle15 0ºAngle fixed

Woofer2 x 5 25”Coated glass fibre

Power Handling180 wattLong term IEC-268-5 (cycled input 77-20K Hz)

Power Handling90 wattRated IEC-268-5 (constant input 77-20K Hz)

Recommended Amp Power25-400 wattRecommended amp power Min / Max

Sensitivity90 dBAverage SPL 2 83 volt / 1mtr (on axis 200-10K Hz)

Max SPL Continued110 dBSinewave 100-8000 Hz / THD – 10%

Max SPL Peak116 dBSinewave 100-8000 Hz / THD – 10%

R26990 each

MK MP150_black_angle.jpg

Miller & Kreisel® MP150 On-Wall Speaker

For environments where stand-mounting or desktop placement is not an option, M&K Sound offers MP150, an On-Wall configuration of our state of the art S150 THX ­Ultra2.

The new MP150 now features the ultra-low compression tweeter as used in the M&K Professional Monitors as well as in the legendary S150. With the “Professional” tweeter aboard the MP150 offers exactly identical components, drivers and technologies in order to deliver the same uncompromising sound quality heard in recording studios and post-production facilities worldwide.

Impedance4 ohm

Recommended Amplifier Power:25-400W

Bass/Midrange:2 x 5.25” Polypropylene

High Frequency Driver:3 x 1” Soft fabric dome

Frequency Response:77 Hz–20KHz +/- 3dB

Sensitivity:90 dB, 2.83V1m

R35990 each

mk S150_black_Angle.jpg

Miller & Kreisel® S150 Speaker

The legendary S150 is the culmination of more than 40 years of loudspeaker design and acustic solution for any critical audio and video recordings.

What this updated version of the legendary studio monitor does in the conveyance of exactly what is there in the recorded source, no more and no less, is difficult to formulate in just a few words.

Essentially, it does pretty much nothing, except open up a wide, clean, clear window on every aspect of recorded sound, allowing you to shift your personal focus as you choose between specific details, instruments or voices, while never losing sight of the totality of the overall musical experience.

Impedance4 ohm

Recommended Amplifier Power:25-500W

Bass/Midrange:2 x 5,25” Fiberglass

High Frequency Driver:3 x 1.1” Soft Fabric Dome

Frequency Response:75 Hz – 20KHz +/- 3dB

Sensitivity:92 dB, 2.83V1m

R37990 each

mk S150T_black_angle.jpg

Miller & Kreisel® S150T Tripole® Speaker

Side- or rear-mounted speakers in a multi-channel audio system pose a radically different set of performance challenges relative to conventional stereo systems, because surround speakers are typically positioned much closer to the listener and deliver sound to the ears from very different angles.

The proprietary M&K Sound Tripole® configuration, essentially two speakers mounted in a single cabinet, is the first and only technology to effectively address these major issues to deliver both image specificity and an enveloping surround field, without compromise.

The M&K Sound S150T Tripole® THX combines both front and side mounted drivers to direct the surround image both indirectly and directly into the listening area.

Impedance4 ohm

Recommended Amplifier Power:5-200W

Bass/Midrange:1 x 5,25” Fiberglass

High Frequency Driver:1.1” Soft Fabric Dome

Side drivers:2 x 3.5” Paper Pulp

Frequency Response:80 Hz – 20KHz +/- 3dB

Sensitivity:86 dB, 2.83V1m

R49990 per pair

bottom of page